bu-01.html - Amended: 11 Luglio 2007. - ( 22.2 )
Quick installation - emergency use.
To replace damaged buoy
To mark sea-field for short time maritime operation.
SPECIFICATION -
Diameter: 2,20 mt - 7'
Floating capacity: 1,500 Kg - 3,000 lbs
Weight in air: 240 Kg - 480 lbs.
Inflating Air pressure: 6 bar.
Focal Plane : 2,6 mt over sea level - 8' approx.
Constructon material: PVC salt water resistant.
Electronic box: marine steel
Positive Test: one year operating in Italian waters.
STANDARD EQUIPMENT - Included -
High Energy radar reflector.
Day mark
6" lantern with bi-filament lamp.
100 Amp. 12 Volt rechargeable sealed accumulator.
n. 4 x 9 watt solar panels.
n. 1 charge regulator.
n. 3 x 100 mt mooring chains - 5 mm diam. open-link
n. 3 Anchors - type by request.
Ballast: 50 Kg
Packaging: n. 8 bags.
NAVIGATIONAL AIDS - OPTIONAL -
255 mm lens
300 mm lens
Beacon
Sound Signal
Hazardous Area Lighting System with a range of 15 nml.:
N. 2 14,000 candela when flashing Morse code "U"
n. 1 Control unit
Marker Beacon
Half-Mile Signal
Fog Signal
Two mile omnidiractional Sound Signal
Ominidirectional Pure Tone Signal
Directional Pure Tone Signal
# 4 - Place Automatic Lampcharger
# 6 - Place Automatic Lampcharger
OPTIONAL: METEREOLOGICAL SENSOR's LIST
Dew point
Solar Radiation
Tipping bucket rain gauge
Wind direction and speed
Temperature: min. / Max.
Fog density
Humidity
Pressure
etc. by request.
OPTIONAL: MARINE SENSOR's LIST
Sea temperature
Stream: direction and speed
PH
REDOX
Temperature
Salinity
etc. by request.
DATA LINK
On board data processor unit.
Radio link - two way -
Main control station radio link up to 50 buoys.
Buoy installed - Floating -
Installation procedure - Step # 1 - On-pier assembly operation -
Installation procedure - Step # 2 - Launch -
Installation procedure - Step # 3 - Tower Assembling -
Installation procedure - Step # 4 - Anchoring -
Back to: miscellaneous production main page
